4-In-1 BUCKET FORKS

Easy to operate and can be repositioned on the ground to grab and hold many things, including attachments

4-in-1 Bucket Forks
  • Patented
  • Easy On - Easy Off
  • No welding - No screws - No holes in bucket
  • Rigid mounts to prevent swaying or shifting
  • Attaches to the cutting edges to provide the most reinforcement
  • Safety chains to keep the forks in place
Mounting is simple - just open the bucket "clam" and drive into the forks, pick them up with the front cutting edge and close the "clam" and hook up the safety chain. When your work is done, set the forks down, unhook the chains, open the "clam" and back out of the forks.

These forks can be removed from a truck or trailer and repositioned on the ground using the round grab bars at the top of the towers. Use the bucket clam to grasp the top of the towers under the round grab bars so the forks do not slip through the clam. Do not use the safety chain and hook for lifting or moving the forks.
Find the right set of bucket forks for your machine with our Equipment Match feature - go to http://arrowmhp.com/cti/equipmentmatch.php
CT I
MODEL
OEMs BUCKET
PART
NUMBER
BUCKET SIZE Cu. Yd. CT I
PART
NUMBER
CT I RETAINER BARS * MEASURE
"B"
MP60 Caterpillar 1120938 1.25 460-0700 460-0015 23.50"
MP60 Komatsu 312630087 1.36 460-0700 460-0015 21.25"
MP60 John Deere
John Deere - Gannon
AT150456 AT186432 AT150456 1.37
1.32
1.00
460-0701
460-0701
460-0701
460-0020
460-0020
460-0020
21"
21.75"
20.50"
MP60 Case 376288A2 1.30 460-0702 460-0035 19.50"
* Measure "B" is the distance from the front cutting edge to the scraper cutting edge across the bottom of the bucket
CT I
MODEL
FITS BUCKET
* MEASURE "B"
LIFT CAP.
at 24"
Load Center
TINE
LENGTH
TOWER
HEIGHT
TINE
SIZE
WEIGHT
(lbs.)
MP60 19.5 - 23.5" 6,000 lbs. 48" 37" 2 x 4" 512
CTI is now a part of Arrow Material Handling Products - Check out the full line of attachments at www.arrowmhp.com